oaxino Posted February 15, 2023 Report Share Posted February 15, 2023 Local Interconnect Network (Lin) Bus Master/Slave/SnifferPublished 2/2023MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHzLanguage: English | Size: 447.29 MB | Duration: 0h 35mBuilding both a LIN Master and Slave/Sniffer using the Arduino based Teensy 4.0 and XIAO ESP32C3.What you'll learnLearn the basic LIN (Local Interconnect Network) basics from an implementation point of view.Exposure to the Arduino Integrated Development Enviroment (IDE)Program both the Arduino based Teensy 4.0 and XIAO ESP32C3 modules for act as a LIN Master and Slave/SnifferLearn to build LIN prototyping hardware using breadboard.RequirementsBasic embedded hardware and software and a willingness to expand on embedded C software.DescriptionThe Emicros Instructional Series on "Building A Local Interconnect Network (LIN) Project From Hardware to Software" exposes the student to basic LIN principles generating a break signal for the Master to responding to the break signal by the Slave/Sniffer. The sync character is next followed by the payload. The protected ID generation is discussed and coded as well as the checksum for both LIN 1.x and 2.x specification. The hardware for sending and receiving LIN frames as a LIN Master or Slave/Sniffer using the Arduino based Teensy 4.0 and/or Seeed Development XIAO ESP32C3 modules. Software is written in C and compiled using the FREE Arduino IDE.In the hardware section the schematic used for building the hardware is shown and then the hardware is built using a breadboard. Two versions for both the Teensy 4.0 and the XIAO ESP32C are developed. The LIN interface IC is the MCP2003 or MCP2004. Note the XIAO ESP32C3 can be purchased for around $5.The software starts with setting up the FREE Arduino IDE writing the software in C. The break signal is developed first then the sync byte and the LIN payload. The checksum is shown and then both Master and Slave/Sniffer software is produced.This course is for anyone with basic electronic hardware and software knowledge and having the motivation to learn more embedded hardware and software techniques.OverviewSection 1: IntroductionLecture 1 IntroductionSection 2: Building The HardwareLecture 2 Building The HardwareSection 3: Installing the Development EnviromentLecture 3 Installing The Development EnviromentLecture 4 ESP32C3 SoftwareSection 4: Building And Programming a LIN Master (Transmitter)Lecture 5 LIN Master - IntroductionLecture 6 LIN Master - SetupLecture 7 LIN Master - Generate Break & SyncLecture 8 LIN Master - Protected IDLecture 9 LIN Master - loop()Lecture 10 LIN Master - Send FrameLecture 11 LIN Master - Teensy CodeLecture 12 LIN Master - Read FrameLecture 13 LIN Master - XIAO ESP32C3 MasterSection 5: LIN Slave & SnifferLecture 14 LIN Slave & Sniffer - The CodeLecture 15 LIN Slave & Sniffer - XIAO ESP32C3 VersionSection 6: FinalLecture 16 Where to get updatesThis course is for embedded software engineers, electrical engineers, and students exploring a career in the embedded software area.Download linkrapidgator.net:https://rapidgator.net/file/e4c33a3a862660cc1cbb4d713cb6babd/ydlkt.Local.Interconnect.Network.Lin.Bus.MasterSlaveSniffer.rar.htmluploadgig.com:https://uploadgig.com/file/download/60febc04728f9fD6/ydlkt.Local.Interconnect.Network.Lin.Bus.MasterSlaveSniffer.rarnitroflare.com:https://nitroflare.com/view/CCAD98490CADF58/ydlkt.Local.Interconnect.Network.Lin.Bus.MasterSlaveSniffer.rar Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now