BUW EMX (Expert Moldbase Extentions) 15.0.0.0 for Creo 9.0.x [2022, ENG]

[rai100]

[img]https://i120.fastpic.org/big/2022/0706/56/0d0ad86b0f729d2a116fc3a62400b056.jpg?r=1[/img]
[b]BUW EMX (Expert Moldbase Extentions) 15.0.0.0 for Creo 9.0.x [2022, ENG][/b]
Size: 438.9 MB Type: Applications Year/Date of Issue: 2022 Developer: PTC

[b]

Year/Date of Issue: 2022
Version:15.0.0.0
Developer: PTC
Bit depth: 64bit
Interface language: Multilingual (Russian is missing)
Tabletka: Present (TeAM SolidSQUAD-SSQ)
System requirements: Pre-installed Creo Parametric 9.0.x with crowbar from SSQ
Additional Information:
How to connect EMX to installed Creo Parametric 9.0.x - see _SolidSQUAD_\readme.txt !
Description: Creo Expert Moldbase Extension contains customized detailed packages of plates and individual elements from all leading suppliers, taking into account the requirements of the main
standards in this area.
When creating a model block, Creo Expert Moldbase Extension automatically generates an assembly drawing, a bill of materials, and drawings of slabs, taking into account the requirements of ESKD.
Mold components can be created directly in Creo Expert Moldbase Extension or you can use mold components created in CreoTool Design.
Creo Expert Moldbase Extension has a specialized graphical interface with a schematic two-dimensional view of both finished mold block designs and individual components. At the same time, you can create and use your designs, components, types of injection molding machines used, enter in the database of your suppliers.
The choice of the main parameters of the mold components is carried out in a two-dimensional mode. If it is necessary to specify the placement parameters of a particular component, the designer refers to a three-dimensional structure. This approach significantly speeds up the mold development process.
As a rule, full-fledged three-dimensional models of mold assembly with holes, grooves, etc. made in the plates are formed in an automated mode. In this case, all holes and grooves are dependent - when you delete the component for which these structural elements were made, they are also deleted. As the dimensions and locations of components change, these geometric constructs are automatically rebuilt.
Creo Expert Moldbase Extension automatically places fasteners, calculates the length of pushers and signs, and creates cutouts along the part contour. To facilitate visualization, Creo Expert Moldbase Extension allows you to enable/disable the display of any components.
Creo Expert Moldbase Extension implements a mechanism for opening a mold using animation, with an analysis for the intersection of components. The following calculations are possible:
comparing the compression force of the machine and the pressure created inside the mold;
the force acting on the wedge during its movement (in the moving rod mechanism) at a given stroke;
wedge length;
angle of the inclined pusher;
delays (during double opening of the model block);
total design cost in the manufacture of the mold.
Main advantages
High productivity when designing a model block due to the fact that the designer creates a mold from ready-made adaptive components - "cubes" for which drawing templates have already been created.
Reducing the chance of errors, since the placement of components and the execution of all necessary cutouts with the appropriate clearances are fully automated.
The 2D user interface with visualization of changes enables fast mold development without wasting time regenerating the 3D model.
Development of a mold for a specific casting machine with the calculation of the required clamping force.
Automated creation of a control program for processing holes in slabs.
Calculation of the cost of the mold.
Creation of own library of plates, components, designs of mechanisms and model blocks in the dialogue mode.
Quick learning module, interactive help guide with animations.
Key Features
Automatic placement of mold components with subsequent removal of material in plates.
Automatic generation of specifications, assembly drawings and plate drawings.
Automatic creation of associative hole tables in drawings.
Creation of an animation of the mold operation mode with an analysis for the mutual intersection of components.
Libraries of building blocks of molds and individual parts of leading suppliers: DME, DMS, EOC, Futaba, Misumi, HASCO, KLA, Meusburger, Pedrotti, Rabourdin, Strack, FCPK and libraries according to GOST of the following nomenclature:
constructions of model blocks (standard set of all types of sizes, double pushing, double opening);
a set of plates and insulation;
centering elements (bushings, columns);
shanks;
locks;
sprue and central bushings;
pushers and counter pushers;
stops;
fasteners;
pins;
supports;
schemes and elements of the cooling system;
moving rod mechanisms;
inclined pushing mechanisms;
double opening mechanisms;
transmission mechanisms, to obtain threaded models;
hot runner diagrams, nozzles, manifolds, flanges.
Create custom libraries with your own generic designs and mold parts.

[/b]

[img]https://i120.fastpic.org/big/2022/0630/0b/4afd169dda7dfd3e3d94f8475493cc0b.jpg[/img]

[code]https://rapidgator.net/file/feacaef88a1f9ad06d72969bb088ea39/BUW.EMX.15.0.0.0.Creo.9.0.Win64-SSQ_VIS87.rar.html
[/code]