Autodesk PowerMILL 4Axis and 5Axis Training

[kingers]

5.48 GB | 15min 54s | mp4 | 1920X1080 | 16:9
Genre:eLearning |Language:English

Files Included :
1 - Introduction to PowerMill MultiAxis.mp4 (72.97 MB)
10 - Toolpath Connection Part2.mp4 (186.23 MB)
2 - Graphic user interface.mp4 (52.06 MB)
3 - Draft angle Shading Minimum Radius shading Measure.mp4 (136.59 MB)
4 - creating and editing Workplanes.mp4 (124.57 MB)
5 - Tool creation and Tool database.mp4 (142.84 MB)
6 - Block Setup.mp4 (279.24 MB)
7 - Boundaries Options.mp4 (280.29 MB)
8 - Boundaries types.mp4 (100.59 MB)
9 - Toolpath Connection Part1.mp4 (77.02 MB)
11 - 4 Axis Rotary finishing.mp4 (151.98 MB)
12 - How to create 4 axis post in powermill.mp4 (85.31 MB)
13 - 4AXIS Roughing Model Area Clearance.mp4 (228.1 MB)
14 - 4Axis flowling finishing.mp4 (127.93 MB)
15 - 4AXIS DRILLING.mp4 (141.54 MB)
16 - 4AXIS Line projection method.mp4 (102.23 MB)
17 - 4Axis Line projection Finishing from Line TOOLAxis.mp4 (60.38 MB)
18 - 4AXIS Profile finishing EN.mp4 (93.27 MB)
19 - 4AXISBLINE projection.mp4 (68.71 MB)
20 - 4Axis POINT Projection finishing.mp4 (42.79 MB)
21 - 4AXISSurface Projection Finishing.mp4 (98.77 MB)
22 - 4Axis Pattern finishing.mp4 (140.1 MB)
23 - 4Axis Wood working.mp4 (250.24 MB)
24 - Lead Lean Tool Axis.mp4 (49.11 MB)
25 - 32 DRILLING Tapping.mp4 (85.08 MB)
26 - 32Axis operation.mp4 (212.71 MB)
26 - 3plus2b-as-5axis.zip (527.82 KB)
27 - How to create 5 AXIS POST.mp4 (137.67 MB)
27 - MachineData.zip (69.23 MB)
28 - 5Axis Embedded Pattern finishing.mp4 (120.03 MB)
29 - AngledFrame.zip (353.67 KB)
29 - Fixed direction ToolAxis.mp4 (55.55 MB)
30 - 5 Axis Projection surface with reference surface.mp4 (204.39 MB)
30 - joint-5axismc.zip (25.3 KB)
31 - 5 Axis LeadLean Towards Point tool axis.mp4 (64.15 MB)
31 - joint-5axismc.zip (25.3 KB)
32 - 5 Ais SurfProjSpiral.mp4 (134.92 MB)
33 - 3plus2b-as-5axis.zip (527.82 KB)
33 - 5 Axis Plane projection.mp4 (102.67 MB)
34 - 5 Axis Pattern finishing.mp4 (115.99 MB)
35 - 5 Axis UnderCut EN part 1.mp4 (254.68 MB)
36 - 5 Axis UnderCut EN part 2.mp4 (99.13 MB)
37 - 5 Axis Impeller from curve ToolAxis.mp4 (136.12 MB)
38 - 5 Axis Embedded Pattern Finishing 1.mp4 (151.72 MB)
39 - 5 Axis Embedded Pattern Finishing Part 2.mp4 (75.2 MB)
40 - 5 Axis Port Area clearance.mp4 (101.25 MB)
40 - SinglePort2-Start.zip (162.9 KB)
41 - 5 Axis Port Area clearance EN part2.mp4 (104.73 MB)
42 - 3plus2b-as-5axis.zip (527.82 KB)
42 - 5 Axis swarf finishing.mp4 (30.39 MB)
43 - 5 Axis swarf Axial Radial thk.mp4 (51.73 MB)
43 - locnpad-5axismc.zip (126.28 KB)
44 - 5 Axis SWARF Wireframe swarf.mp4 (110.87 MB)
45 - 5 Axis Surface finishing ToolAxis Limits.mp4 (42.94 MB)
45 - locnpad-5axismc.zip (126.28 KB)]
Screenshot

AusFile

https://ausfile.com/mtqpqe380ize
https://ausfile.com/j9b1v0l9efjh
https://ausfile.com/0ayxyix36pea
https://ausfile.com/hmqxjyrb9vjr
https://ausfile.com/g51ephx8ai4e
https://ausfile.com/gzlm5c0xigg7

RapidGator

https://rapidgator.net/file/d3e83fd501ed9f87991bdf49d49d2dbf/
https://rapidgator.net/file/58987d8060f5d6c4b51c0ffd8d9fb1e0/
https://rapidgator.net/file/91b529c7bf84cdf859adc859b0899ff2/
https://rapidgator.net/file/db214677f864767654fc6a7416e29fd5/
https://rapidgator.net/file/627d4c3edf3cb4d51ce1e9d3489d809e/
https://rapidgator.net/file/a33f02e1137519cabf562789f20e1289/