Construction Calc Pro v6.84

[FaridKhan]

Save money by quickly estimating materials. Save time by calculating angles, measurements and quantities. The ideal handy pocket companion for anyone in the construction industry.

Construction Calc Pro has taken 12 months and 21,500 lines of code to develop and is the easiest to use construction calculator and estimator app available on any mobile platform. There is no complicated manual to master or instructions to follow - just enter data and get precise results.

Calculators & estimators include

Aggregate
• Inputs: Width, Length, Thickness, Density, Wastage
• Outputs: Estimate Weight, Volume

Asphalt
• Inputs: Width, Length, Thickness
• Outputs: Estimate Weight, Volume

Balusters
• Inputs: Run length, Baluster width, Baluster spacing
• Outputs: Qty of balusters, Qty spaces, Baluster spacing (center-to-center), Baluster spacing (edge-to-edge), Measurements to far side of each baluster

Board / lineal foot
• Inputs: Thickness, Width, Length, Quantity
• Outputs: Board feet, Lineal feet

Concrete - rectangle
• Inputs: Width, Length, Thickness, Use rebar option, Rebar spacing along width, Rebar spacing along length
• Outputs: Estimate Volume, 60lb premixed bags, 80lb premixed bags, 10kg premixed bags, 25kg premixed bags, 50kg premixed bags, Rebar required

Crown moulding
• Inputs: Wall angle (corner of wall), Crown (spring) angle
• Outputs: Miter angle, Bevel angle

Drop ceiling
• Inputs: Length at ceiling, Width at ceiling, Tile size, Distance (anchor to drop ceiling)
• Outputs: Estimate Ceiling area, Ceiling tiles, Perimeter moulding, Main supports, Tee support peices, Wire length (each), Wire length (total), Wire anchors

Drywall
• Inputs: Room width, Room length, Room height, Panel width, Panel height, Include ceiling option
• Outputs: Estimate Area - surface area. Materials - Drywall panels. Joint compounds - Readymixed, Lightweight readymixed, Setting-type, Lightweight setting-type. Fastener - Drywall nails, Drywall screws. Additional items: Joint tape, Primer, Adhesive

Flooring
• Inputs: Width, Length, Wastage, Square Ft or M per box
• Outputs: Total area, Boxes needed

Insulation
• Inputs: Total area width, Total area length, Batt/roll width, Batt/roll length
• Outputs: Batts/rolls required, Total area

Linear cost estimator
• Inputs: Single panel length, Qty of panels, Cost per linear foot, Cost per linear meter
• Outputs: Total cost, Total length

PAINT
Inputs: Wall length, Wall height, Number of coats, Surface type
Outputs: Estimate Gallons required, Liters required

Rafter
• Inputs: Run, Pitch (/12")
• Outputs: Rafter length

Rise/run/angle
• Inputs: Rise, Run, Angle (Enter rise and either run or angle)
• Outputs: Angle, slope, Run

Roofing
• Inputs: Width, Length, Pitch, Sq ft or M per pack, Type, Nails, Safety margin
• Outputs: Roof surface area, Packs needed, Nails

SQ cost estimator
• Inputs: Width, Length, Cost per Sq ft or M
• Outputs: Total cost, Total area, Total area (acres)

Squaring (3-4-5)
• Inputs: Width, Length
• Outputs: Diagonal

Stairs
• Inputs: Total rise, Custom rise, Custom run
• Outputs: Riser height, Total risers, Tread run, Total treads, Total run, Stringer board length, Elevation, Running stringer points

Tiles
• Inputs: Room width, Room length, Tile width, Tile length, Use border tiles option, Border tile width, Border tile length, Tile pattern, Safety margin
• Outputs: Estimate Tiles needed, Border tiles needed

Paid version



Construction Calc Pro v6.84 (13.62 MB)
NitroFlare Link(s)

https://nitroflare.com/view/2337393B6355A08/Construction_Calc_Pro_v6.84.rar

RapidGator Link(s)

https://rapidgator.net/file/fac024cadb13bef3a682ff9793529f30/Construction_Calc_Pro_v6.84.rar